Laser Photovoltaic Cells
600mW 808nm Laser Photovoltaic Die MT018-808-600mW-DIE
ModelMT018-808-600mW-DIE
- Specification
- 800–840 nm · 1.8 × 1.8 mm · Bare die
MT018-808-600mW-DIE is a bare-die laser photovoltaic cell for 800–840 nm optical input. The die measures 1.8 × 1.8 mm and is 200 μm thick, with a negative top side and positive bottom side.
Datasheets & documents
Overview
MT018-808-600mW-DIE is a bare-die laser photovoltaic cell for 800–840 nm optical input. The die measures 1.8 × 1.8 mm and is 200 μm thick, with a negative top side and positive bottom side.
At a test case temperature of 25°C, 0.5 W optical input yields a typical output of 0.274 W, 6.08 V and 0.045 A. With 1.0 W optical input, typical output is 0.578 W, 6.08 V and 0.095 A.
Mechanical dimensions
| Item | Specification |
|---|---|
| Die dimensions | 1.8 × 1.8 mm |
| Thickness | 200 μm |
| Top-side pad count | 4 |
| Top pad Au thickness | 0.4 μm |
| Bottom Au thickness | 0.4 μm |
Electrode polarity
| Surface | Output polarity |
|---|---|
| Top | Negative (−) |
| Bottom | Positive (+) |
Typical characteristics
The following PV and IV curves are reproduced from the product datasheet.
Absolute maximum ratings
| Parameter | Symbol | Minimum | Typical | Maximum | Unit |
|---|---|---|---|---|---|
| Storage temperature | TS | −40 | 25 | 85 | °C |
| Operating case temperature | TC | −40 | — | 85 | °C |
| Maximum optical input power | Popt IN | — | — | 1.2 | W |
Operating characteristics
Output values are typical at the maximum power point (Pmpp), with a test case temperature of 25°C.
| Parameter | Symbol | Minimum | Typical | Maximum | Unit |
|---|---|---|---|---|---|
| Recommended input wavelength | λ IN | 800 | 808 | 840 | nm |
| Optical input (W) | Pmpp (W) | Voltage at Pmpp (V) | Current at Pmpp (A) |
|---|---|---|---|
| 0.5 | 0.274 | 6.08 | 0.045 |
| 1.0 | 0.578 | 6.08 | 0.095 |
