750mW 808nm Laser Power Converter (LPC) MT-LPC-808-750mW-FC

Laser-powered isolation with PoF

MT-LPC-808-750mW-FC is a laser power converter (LPC), also called an optical power converter, for power over fiber (PoF). It converts laser energy delivered through a FC optical interface into electrical power for isolated sensors and electronic circuits. The recommended optical input range is 800–840 nm.

Overview

MT-LPC-808-750mW-FC is a GaAs multi-junction optical power converter with an FC optical port for electrically isolated power-over-fiber systems. The recommended input spectrum is 800–840 nm, with a typical wavelength of 808 nm.

At a case temperature of 25°C, 1.5 W optical input provides a typical maximum-power-point output of 0.844 W, 6.15 V and 0.1372 A. The converter supports multimode fiber coupling for isolated sensor power, electric utility monitoring and electronic circuits in high-EMI environments.

Mechanical dimensions

FC optical port. Dimensions in the drawing are in mm.

Pin assignments

Typical characteristics

The following PV and IV curves are reproduced from the datasheet, measured at 25°C with an 808 nm laser.

Absolute maximum ratings

Proper heat sinking is required to keep the case temperature within its rated range.

Fiber specifications

Protect the input fiber with a sleeve or ceramic ferrule during handling.

Operating characteristics

Output values are typical at the maximum power point (Pmpp), with a test case temperature of 25°C.