3W 808nm Laser Power Converter (LPC) MT-LPC-808-003W-SMA

Laser-powered isolation with PoF

MT-LPC-808-003W-SMA is a laser power converter (LPC), also called an optical power converter, for power over fiber (PoF). It converts laser energy delivered through a SMA905 optical interface into electrical power for isolated sensors and electronic circuits. The recommended optical input range is 800–840 nm.

Overview

MT-LPC-808-003W-SMA converts fiber-delivered optical power into electrical power for isolated supplies. It supports 800–840 nm input through SMA905 and a −40 to +85°C case temperature.

At a 25°C case temperature, typical output is 2.74 W with 5 W optical input, or 3.21 W, 6.1 V and 0.526 A with 6 W optical input. GND connects to the housing; NC has no internal connection.

Applications

Applications include isolated sensor supplies, electric utility monitoring and powering electronic circuitry in strong electromagnetic fields.

Mechanical dimensions

Dimensions are in mm. Provide adequate heat sinking to keep the case temperature within its rated range.

Pins and interface

Typical characteristics

Measured at 25°C using a 808 nm laser.

Absolute maximum ratings

The maximum optical input rating requires adequate heat sinking; insufficient cooling may cause the case temperature limit to be exceeded.

Fiber specifications

Protect the input fiber with a sleeve or ceramic ferrule during handling.

Operating characteristics

Values below are typical at the maximum power point (Pmpp), with a case temperature of 25°C.